Step-by-Step Guide to Removing Water from Your BiPAP Machine

Follow these clear steps to safely remove water before transporting your BiPAP machine:

1. Turn Off and Unplug the Machine

Before handling the humidifier chamber, always turn off the BiPAP machine and unplug it from the power source. This prevents electrical hazards and ensures the device is safe to handle.

2. Detach the Humidifier Chamber

Most BiPAP machines have a detachable humidifier chamber. Gently remove it from the main unit by following the manufacturer’s instructions. Avoid forcing parts apart to prevent damage.

3. Empty the Water Completely

Pour out all the water from the humidifier chamber into a sink or drain. Tilt the chamber to ensure no water remains trapped inside corners or crevices. If the chamber has a removable lid or cap, open it to allow better drainage.

4. Dry the Chamber Thoroughly

Use a clean, dry cloth or paper towel to wipe the inside and outside of the humidifier chamber. Let it air dry for a few minutes to remove any residual moisture. Avoid using harsh chemicals or abrasive materials that could damage the chamber.

5. Inspect the Chamber and Machine

Check the humidifier chamber for cracks or damage that could cause leaks. Also, inspect the main machine for any signs of water or moisture. If you notice any issues, contact a professional for repair before using or transporting the device.

6. Reassemble and Pack Carefully

Once the chamber is dry and inspected, reattach it securely to the BiPAP machine. Pack the device in a padded case or box to protect it from bumps during transport. Keep the machine upright to minimize any risk of water movement.